Semen Analysis: What It Measures, Normal Results & What Happens Next
By Emily Johnson, Content Writer & Fertility Advocate · Medically reviewed by Dr. Sarah Ahmed, Medical Content Advisor
A semen analysis is a laboratory test of sperm quantity and quality — how much semen you produce, how many sperm it contains, how well they move, and how many are normally shaped. It is the first test a doctor orders when a couple is having trouble conceiving, because male factors are involved in about a third of infertility cases, and it is also the test that confirms a vasectomy worked. This guide explains what a semen analysis measures, what the normal ranges are, how to read your report line by line, what abnormal results actually mean, and what happens next.
Table of Contents
The Short Answer
A semen analysis checks one sample of semen against reference values published by the World Health Organization (WHO). The main numbers are volume (at least 1.4 mL), sperm concentration (at least 16 million per mL), total sperm number (at least 39 million per ejaculate), total motility (at least 42% moving), progressive motility (at least 30% swimming forward), vitality (at least 54% alive) and normal morphology (at least 4% normally shaped). A result below one of these values does not mean you cannot father a child — the WHO values are the 5th centile of fertile men, not a dividing line between fertile and infertile — and a single abnormal result is almost always repeated before any conclusions are drawn. Results usually arrive within a few days, and in the US the test typically costs $250–500 out of pocket.
What Is a Semen Analysis?
A semen analysis — also called a sperm count, sperm analysis, or male fertility test — is a laboratory examination of a semen sample under a microscope. Semen is the thick, white fluid released during ejaculation; it carries sperm, the cells that hold half the genetic material needed to make a baby. The analysis measures the physical and biological characteristics of that sample and compares them with reference values, to estimate how likely the sperm are to reach and fertilise an egg.
It is a simple test with no known risks, and it is usually the first step in a fertility evaluation for the male partner — before blood tests, ultrasounds, or any treatment. MedlinePlus describes the semen analysis test in plain language, including what each measurement means. Because it is fast, cheap, and non-invasive compared with almost every other fertility test, doctors order it early: there is no reason to put a couple through months of testing on one side while a treatable problem sits unnoticed on the other.
When Is a Semen Analysis Done?
A doctor usually recommends a semen analysis in two situations:
- Trouble conceiving. If you and your partner have been trying for a baby for at least 12 months without success (6 months if the female partner is 35 or older), a semen analysis is part of the standard fertility workup for both partners. Male factors contribute to roughly a third of infertility cases, so testing the male partner is not an afterthought — it is half the evaluation.
- After a vasectomy. A semen analysis 8 to 16 weeks after a vasectomy checks that no sperm remain in the semen. It is not unusual to find sperm in the first few ejaculations after the procedure, so repeat testing continues until a sample shows zero sperm — only then can other birth control be stopped.
Your doctor may also order one if you have had a testicular injury or surgery, an infection, a varicocele (an enlarged vein in the scrotum), or a hormone disorder — or before sperm freezing, so the lab knows what it is storing.
How to Prepare for a Semen Analysis
Preparation is simple, but it matters — a poorly collected sample is the most common reason for a misleading result:
- Abstain from ejaculation for 2 to 7 days before the test. Too short an interval lowers the count; too long an interval can lower motility. Two to five days is the sweet spot most labs aim for, and your provider will give you exact instructions.
- Collect the sample as instructed. You will usually provide it in a private room at the lab by masturbating into a sterile, wide-mouthed container. Urinate and wash your hands and penis first, do not touch the inside of the container, and do not use lubricants or saliva — they can harm sperm.
- Collect all of it. If you miss any of the ejaculate, tell the lab — a partial sample understates volume and count. Do not try to scoop up semen that missed the container; it may be contaminated.
- Keep it at room temperature and deliver it fast. Sperm begin to die once the sample cools, so the lab needs to examine it quickly — usually within an hour. Some labs allow home collection if you can get the sample to them within 30 to 60 minutes, kept at body temperature.
If you are unwell, have a fever, or have recently been ill, tell your provider — a fever in the last two to three months can temporarily depress sperm production, and it may be better to wait than to test a sample that does not reflect your usual state.
What Happens During the Test?
Once the sample reaches the lab, an andrologist (a laboratory specialist in male fertility) examines it in stages. First come the physical checks: volume, colour, pH, and how long the semen takes to liquefy — fresh semen is thick and gel-like, and it should turn fluid within 15 to 30 minutes. Then a drop goes under the microscope, where the technician counts sperm, watches how they move, and examines their shape. A separate stain test can check vitality — what percentage of sperm are alive, moving or not.
The whole laboratory process takes a few hours, but you will usually get your results within a few days. Some labs now offer computer-assisted analysis, which counts and tracks sperm automatically; the reference values are the same either way. If the first result is abnormal, the standard next step is a repeat test — sperm production varies so much from week to week that one sample is rarely the whole story.
What Does a Test of Sperm Measure?
Each line on your report measures something different. Here is what each one means, and why it matters:

- Volume — the amount of semen in the sample. Low volume can mean incomplete collection, a short abstinence interval, retrograde ejaculation (semen going into the bladder instead of out), or a blocked ejaculatory duct.
- Sperm concentration — the number of sperm per millilitre of semen. This is the most familiar number, but on its own it is incomplete — a small volume with a high concentration can still mean a low total count.
- Total sperm number — concentration multiplied by volume: the total number of sperm in the whole ejaculate. Many specialists consider this a better marker than concentration alone.
- Total motility — the percentage of sperm showing any movement at all.
- Progressive motility — the percentage swimming forward in a straight line or large circles. This is the fraction that actually matters for reaching the egg; sperm that twitch in place do not count.
- Morphology — the percentage of sperm with a normal shape: normal head, midpiece, and tail, judged by strict Kruger criteria. The criteria are deliberately demanding — the median fertile man has only about 14% normal forms.
- Vitality — the percentage of sperm that are alive, moving or not. It is mainly measured when most sperm are immotile, to distinguish sperm that are alive but not moving from sperm that are dead.
- pH — the acidity of the semen. Normal semen is mildly alkaline, which protects sperm from the acidic vaginal environment. A low pH can point to a blocked ejaculatory duct.
- Liquefaction time — how quickly the semen turns from gel to fluid. If it stays thick for over an hour, sperm cannot swim freely.
- White blood cells (leukocytes) — immune cells in the semen. More than 1 million per mL can signal infection or inflammation.
Semen Analysis Normal Ranges: WHO 2021 Reference Values
Most laboratories report your results against the reference values in the World Health Organization laboratory manual, 6th edition (2021) — the current standard. These values come from about 3,500 men in 12 countries whose partners conceived naturally within 12 months, and each value is the 5th centile of that group: 95% of those fertile men scored at or above it.
| Parameter | WHO 2021 lower reference limit |
|---|---|
| Semen volume | 1.4 mL or more |
| Sperm concentration | 16 million per mL or more |
| Total sperm number | 39 million per ejaculate or more |
| Total motility (any movement) | 42% or more |
| Progressive motility (forward movement) | 30% or more |
| Vitality (live sperm) | 54% or more |
| Normal morphology (strict criteria) | 4% or more normal forms |
| pH | 7.2 or higher |
| White blood cells | Less than 1 million per mL |
| Liquefaction | Complete within 30 minutes |
Two cautions belong with this table. First, a value below the limit is not a diagnosis of infertility — it means your result falls in the lowest 5% of men who recently fathered a pregnancy, and the WHO manual is explicit that the 5th centile is not a line between fertile and infertile men. Many men with below-range results conceive naturally. Second, a value above the limit does not guarantee pregnancy — a semen analysis cannot measure everything, including the integrity of the DNA inside the sperm. Some laboratories still report the older WHO 2010 values (volume 1.5 mL, concentration 15 million/mL, total motility 40%), so check which edition your lab uses before comparing numbers.
How to Read Your Semen Analysis Results
Read the report line by line against the reference values — but read the lines together, not one at a time. A single low number matters less than the pattern:
- All values in range: reassuring, and the focus of the fertility workup shifts to the female partner and to timing. It does not rule out every male factor — sperm DNA fragmentation, for example, can be present with a completely normal standard analysis — but it makes a major sperm problem unlikely.
- One value low, the rest fine: common, and often the least worrying pattern. A slightly low morphology with a good count and motility, for instance, rarely changes the plan on its own. The usual step is a repeat test to see whether it was a one-off.
- Several values low together: more meaningful. Low count plus low motility plus low morphology points to a broader problem with sperm production, and your doctor will look for a cause.
- Zero sperm (azoospermia): needs a urology referral. It can mean a blockage (which is sometimes fixable) or a production problem in the testes, and the next tests are hormone bloods and an examination — not another semen analysis alone.
The most useful single number for planning treatment is one your report may not print: the total motile sperm count (TMSC) — volume × concentration × total motility. It estimates how many moving sperm are in the whole sample, and it is the number fertility doctors use to decide whether intrauterine insemination (IUI) is worth trying. For example: 2.0 mL × 20 million/mL × 50% motility = 20 million motile sperm. Our IUI treatment guide explains how that number shapes the choice between IUI and IVF.
What Abnormal Results Mean: The Terms on Your Report
Laboratories and doctors use Greek-derived terms for abnormal results. If your report or your doctor uses one of these words, here is what it means:
| Term | Meaning |
|---|---|
| Oligozoospermia | Low sperm count (below 16 million/mL, or below 39 million total) |
| Asthenozoospermia | Low motility — too few sperm moving, or moving forward |
| Teratozoospermia | Low morphology — too few normally shaped sperm (below 4%) |
| Azoospermia | No sperm at all in the ejaculate |
| Hypospermia | Low semen volume (below 1.4 mL) |
| Leukocytospermia | Too many white blood cells (above 1 million/mL), suggesting infection or inflammation |
| Necrozoospermia | Very low vitality — most sperm are dead, not just immotile |
None of these terms is a final diagnosis. Each one describes a measurement, not a cause — and the same term can have many different causes, from a recent fever to a varicocele to a genetic condition. That is why the next step after an abnormal result is almost always more testing, not immediate treatment. The ASRM’s male infertility evaluation fact sheet explains which follow-up tests a specialist orders and what each one looks for.
What Can Skew Your Results?
Sperm production takes about 72 days from start to finish, so your sample reflects your health over the last two to three months — not just last week. Anything that disturbed that window can show up in the numbers:
- Fever or illness in the last 2–3 months — even a bad flu can temporarily cut sperm production.
- Heat — frequent hot baths, saunas, laptops on the lap, or tight clothing that raises scrotal temperature.
- Smoking, heavy alcohol, and recreational drugs — all linked to lower count and motility.
- Certain medicines — including some hormone treatments, steroids, and chemotherapy drugs. Tell your doctor everything you take.
- Stress and poor sleep — they do not cause infertility on their own, but they can shift hormone levels and sample quality.
- Abstinence interval — too short lowers the count; too long lowers motility. The 2–7 day window exists for a reason.
- Incomplete collection — the most common avoidable error. A missed first portion of the ejaculate (which carries the most sperm) understates the count.
This is also why a repeat test is standard: if your first result was taken during or just after a fever, the repeat three months later — after a full new cycle of sperm production — often looks quite different.
What Happens Next After Abnormal Results
An abnormal semen analysis is the start of an investigation, not the end of one. The usual sequence is:

- Repeat the test. The European Association of Urology recommends at least two analyses when the first is abnormal, and the repeat is usually around three months later — long enough for a fresh cycle of sperm production. If the repeat is normal, the first result is generally set aside.
- Look for the cause. Depending on the pattern, your doctor may order hormone blood tests (testosterone, FSH, LH, prolactin), a physical examination, a scrotal ultrasound (to check for varicocele or blockage), and tests for infection or genetic causes. Our guide to epididymitis and male fertility covers one common infection-related cause.
- Treat what is treatable. Some causes have direct fixes: infections get antibiotics, a varicocele can be repaired surgically, hormone problems can be corrected, and lifestyle changes can improve numbers over a few months. Our guides to increasing sperm count and raising sperm motility explain what the evidence actually supports — and what it does not.
- Plan treatment around the numbers. If natural conception remains unlikely, the TMSC and the pattern of results guide the choice: IUI for mild problems, IVF for moderate ones, and ICSI (injecting a single sperm into the egg) when counts are very low or zero in the ejaculate and sperm must be retrieved directly. A urologist or fertility specialist makes this call with you — not a lab report alone.
Semen Analysis vs At-Home Sperm Tests
At-home sperm test kits are widely sold, and they have a real use — but they are not a semen analysis. A kit typically measures one or two things, usually sperm concentration and sometimes motility, from a sample you test yourself. What it cannot do is measure volume accurately, assess morphology under strict criteria, check vitality, pH, liquefaction, or white cells, or give you a total motile count. In other words, it answers “are there sperm?” and not much else.
That makes a kit reasonable for a quick first check — for example, after a vasectomy, or if you want a rough idea before booking a clinic appointment — but it cannot replace a laboratory analysis for a fertility workup. If a home test is abnormal, or if you have been trying for a year without success, a lab semen analysis is the next step. If a home test is normal and pregnancy still is not happening, the same applies: a normal kit result rules out very little.
How Much Does a Semen Analysis Cost in the US?
The out-of-pocket cost of a semen analysis is usually between $250 and $500, according to Cleveland Clinic — though the price varies by provider, facility, and insurance coverage. Many insurance plans cover it as part of an infertility workup, especially when a doctor orders it, so it is worth checking your coverage before paying out of pocket. At-home kits are cheaper (typically $50–150) but, as above, measure far less. Advanced add-on tests — such as sperm DNA fragmentation testing — cost extra and are ordered only when the standard analysis does not explain the problem.
Myths About Semen Analysis
- “A normal result means we will definitely conceive.” No. A normal semen analysis makes a major sperm problem unlikely, but fertility also depends on the female partner, timing, and factors no semen test measures — including sperm DNA integrity.
- “A low result means I am infertile.” No. Below-range values are the lowest 5% of fertile men, not a verdict. Many men with low results conceive naturally, and many low results improve on repeat testing or with treatment.
- “The longer I abstain, the better my result.” No. Abstaining longer than 7 days raises the count slightly but lowers motility and increases DNA damage in the sample. The 2–7 day window is the balance point.
- “One test is enough.” Rarely. Sperm numbers vary so much from sample to sample that guidelines recommend repeating any abnormal result — and a single normal result after months of trying does not close the investigation either.
- “Sperm health is only about count.” No. A man can have a normal count with poor motility or morphology, and still have difficulty conceiving. Count, movement, and shape all matter — which is why the report has so many lines.
- “Only older men need this test.” No. Male fertility problems affect men of all ages, and the test is cheap, quick, and painless. If a couple has been trying for a year, both partners should be evaluated — regardless of age.
When to See a Doctor
Book a fertility evaluation — for both partners — if you have been trying to conceive for 12 months without success (6 months if the female partner is 35 or older, and straight away if she is 40 or older). See a doctor sooner if you have had a testicular injury or surgery, a history of undescended testicles, a varicocele, an infection such as epididymitis or mumps after puberty, erection or ejaculation problems, or a previous semen analysis that was abnormal.
A fertility evaluation is straightforward: cycle history and ovulation testing for the female partner, a semen analysis for the male partner, hormone blood tests, and checks that the fallopian tubes are open. Most causes it finds are treatable, and finding them early matters — especially after 35, when time is the one thing you cannot get back. Our guide to how to get pregnant explains the full workup from both sides, and our when is a woman most fertile guide covers timing intercourse around the fertile window.
Frequently Asked Questions (FAQs)
What is a semen analysis?
A semen analysis — sometimes called a test of sperm — is a laboratory test that measures the quantity and quality of semen and sperm — volume, sperm count and concentration, motility, morphology, vitality, pH, liquefaction time, and white blood cells. It is the first test doctors order when a couple has trouble conceiving, and it is also used to confirm a vasectomy worked. It is simple, painless, and has no known risks.
What is a normal semen analysis result?
Against the WHO 2021 reference values, a normal result means volume of at least 1.4 mL, sperm concentration of at least 16 million per mL, total sperm number of at least 39 million per ejaculate, total motility of at least 42%, progressive motility of at least 30%, vitality of at least 54%, and at least 4% normally shaped sperm. These values are the 5th centile of fertile men — a result below one of them is not a diagnosis of infertility.
How long do semen analysis results take?
The laboratory work takes a few hours, and you will usually receive your results within a few days of providing the sample. If the first result is abnormal, your doctor will usually order a repeat test before drawing any conclusions.
How long should I abstain before a semen analysis?
Avoid ejaculation for 2 to 7 days before the sample is collected. Too short an interval lowers the sperm count; too long lowers motility. Two to five days is the sweet spot most labs aim for — follow the exact instructions your provider gives you.
Can one abnormal semen analysis mean infertility?
No. Sperm numbers vary a lot from sample to sample in the same man — illness, fever, stress, heat, medicines, and the abstinence interval can all shift the numbers. Guidelines recommend at least two analyses when the first is abnormal, with the repeat usually around three months later, before any conclusions are drawn.
What does zero sperm in a semen analysis mean?
Zero sperm (azoospermia) needs a urology referral. It can mean a blockage in the tubes that carry sperm — which is sometimes surgically fixable — or a problem with sperm production in the testes. The next steps are hormone blood tests and an examination, and in some cases sperm can be retrieved directly from the testes for use with ICSI.
How much does a semen analysis cost?
In the US, the out-of-pocket cost is usually $250–500, varying by provider and facility. Many insurance plans cover it as part of an infertility workup when a doctor orders it. At-home sperm test kits are cheaper ($50–150) but measure far less — usually just count and sometimes motility.
Can I do a semen analysis at home?
At-home kits can estimate sperm count and sometimes motility, but they cannot do a full semen analysis — they do not measure volume, morphology, vitality, pH, liquefaction, or white blood cells, and they cannot calculate a total motile sperm count. A kit is fine for a rough first check, but a laboratory analysis is needed for a proper fertility workup.
About the author: Emily Johnson is a Content Writer & Fertility Advocate who covers IVF and fertility treatment topics. Meet the team.
Medical review: This article was medically reviewed by Dr. Sarah Ahmed, Medical Content Advisor, for clinical accuracy. Meet the team.
Medical disclaimer: This article is for informational purposes only and is not medical advice, diagnosis, or treatment. Due dates are estimates, and every pregnancy is different. Always confirm your due date and any testing or treatment decisions with your clinic or healthcare provider.

